Manual Tube Bending Machine XOTR 60

Thanks to the modular concept design, there is a very practical option of successive adding of accessories. If need arises to extend the operating capabilities of bending machines, you need not provide a new equipment, buying a specific component will do.

Special accessory OS 35 (OS 60) – extension to thin-walled tube bending

Intended for bending thin-walled tubes and spatial bends.

• Dimensions [mm]: 650 × 1 800 × 1 000
• Weight [kg]: 55
• Tube diameters [mm]: 20 ÷ 60

Drives

The bending machines can be equipped with electric- or compressed-air drive, thus replacing the original hand drive. Such replacement is recommended when bending a larger quantity of pieces.

PP 400 pneumatic drive

• Input air pressure: 0,2 ÷ 0,6 MPa
• Max. air consumption: 0.9 m³ · min⁻¹
• Speed: 1 ÷ 4.2 min⁻¹

EPN 400 electric drive

• Input power: 760 W
• Voltage: 230 V
• Speed: 0.7 ÷ 1.2 min⁻¹

Accessories for thin-walled tubes

These accessories enable to clamp and bend thin-walled tubes with the proportion D/t > 15. Firm and fast clamping along the whole circumference of tube is ensured by the clamp bracket with circular cam and profile liner. In order to avoid tube deformation, it is necessary to use a profile pair of rollers and one firm or ball mandrel for every thin-walled tube.

• Profile liners
• Clamp bracket with circular cam
• Firm mandrel
• Profile rollers

Atypical segments

In case of special requirements by a customer, it is possible to deliver atypical segments outside the serial production. We also produce segments for the bending of square tubes, flat ovals and sectional steel.

Modification XOTR 60 » XOTR 35

To enable the bending of tubes with a diameter 20 mm ÷ 1" on the serial segments of the tube bending machine XOTR 35 in the body of the XOTR 60, it is necessary to use a set of clamp adapters and a pair of universal rollers.

• Segment pad
• Segment pivot
• Gear adapter
• Universal rollers