Tube Bending Machine XOTS 35

Range of bent diameters [mm]

20 ÷ 35

Bending segments for tube diameters [mm]

20, 25, 28 30, 32, 35, Atyp. 6÷35

Bending segments for tube diameters ["]

½, ¾, 1,

Bend diameters on tube axis [mm]

60, 75, 90, 110, 18÷110

Dimensions w x l x h [mm]

860 x 2500 x 1060

Max. length of clamped tube (up to the beginning of 1st bend [mm]

1900

Weight [kg]

140

Input [kW]

1,8

Supply voltage [V]

400

Output speed [min-1]

4,7

The electric tube bending machine XOTS 35 is designed for bending thick-walled and thin-walled tubes up to Ø 35 mm. Due to its simple programmable control and light construction, this tube bender is especially suitable for piece and small-batch craft production. However, its concept also fully meets the needs of classic mass production.

The bending machine is equipped with a control unit enabling successive selection of 3 bending angles set by mechanical stops.

Thanks to its design, the XOTS 35 tube bending machine enables precise and high-quality cold tube bends. Control can be performed in both manual and automatic mode.

Send an inquiry

Basic desing

The basic design of the XOTS 35 tube bending machine includes:

Support stand with guide, clamping chuck and mechanism for manual release of mandrel.
Bending unit (motor with gearbox and torque multiplier).
Spindle for placing bending segments with inner hole 20 mm.
Bending arm with mechanical clamping of tube.
Fixed arm with tip and set-screw of backing slide element.
Mandrel rod.
Electrical control cabinet.
Control console on separate stand.

Technical Parameters

Range of bent diameters [mm]		20 ÷ 35
Bending segments for tube diameters	[mm]	20	25	28 30	32 35	Atyp. 6÷35
Bending segments for tube diameters	["]	½	¾		1
Bend diameters on tube axis [mm]		60	75	90	110	18÷110
Max. cross-section of bent materials
Dimensions w × l × h [mm]		860 × 2500 × 1060
Max. length of clamped tube (up to the beginning of 1st bend) [mm]		1900
Weight [kg]		140
Input [kW]		1.8
Supply voltage [V]		400
Output speed [min^-1]		4.7

Accessories

Accessories of segments for thin-walled tubes

Enable to clamp and bend thin-walled tubes with the proportion D/t > 15.
In order to avoid tube deformation, it is necessary to use a profile pair of rollers and one firm or ball mandrel for every thin-walled tube.

Atypical segments

In case of special requirements by a customer, it is possible to deliver atypical segments outside the serial production.
We also produce segments for the bending of square tubes, flat ovals and sectional steel.

Back to overview

Menu top

Breadcrumb navigation

Tube Bending Machine XOTS 35

UNIT PLUS s.r.o.